2006 Dan Wesson CBOB Facelift

[TucsonMTB]

This 2006 Vintage Dan Wesson CBOB purchased used, has been one of my favorite range toys for many years, and is starting to show its age.

So, when I recently bought a $5 sand blaster and $8 worth of glass beads from Harbor Freight the CBOB started worrying, with good reason.

The first test with glass beads produced an overly bright finish without removing the some of the handling marks. $7 worth of pool filter sand from Home Deport turned out to be the missing part of the equation.

So far, I have only worked on the slide. I'm about due for a full tear down at which time the blasted parts of the frame will also get refreshed.



Nice clean looking top view, eh? Where did all those holster and handling marks go!?



The bottom view shows the contrast between the fairly coarse original blasted finish on the frame and the new slightly smoother finish on the slide. Sand blasting, followed by glass beads produces a finish very similar to what Kimber provides on their stainless models. In my experience, they don't scratch or show holster wear easily. Here's hoping the CBOB will be similarly blessed.



The Champion brand front sight (now re-branded as "Kensight") is beautifully fitted and looks like it would be hard to remove. Nope! It is held in with a pin, pictured here, and the pin is easy to drive out because it is NOT a blind pin. The sight itself is hand tight in the dovetail. The rear sight was also easy to remove, held in by a set screw and NO Loc-tite. Life is good!

I love the build quality on this 1911! Once it is finished, I may have to spring for a new set of night sights.

TussonMTB . . . who might be cheap

[gb6491]

Nice work sir! I think you've developed an excellent texture there on the slide
I look forward to seeing the completed project.

I love it when a plan comes together
Regards,
Greg

[Bawanna]

That's probably the only thing I don't absolutely love about my Cbob is the course texture which as you mention hangs on leather and makes it rather unsightly. I carry it everyday so it gets drug in and out of the holster a few times a day.

A detective here recently bought the blaster setup from Harbor Freight as well and with some spiritual guidance from Greg he got his new Colt Rail gun that he carries for work to match his Kimber's finish. He's big on having multiple guns set up exactly the same. Same finish, same controls etc.

I inquired if he'd be willing to blast my Cbob and he refused. He did say he'd bring me all the stuff so I could do it myself.

Still building up my nerve. Might like it and then who knows. Might sandblast the house and the van and who knows what.

You done real good. Might just be the incentive I need to push me over the edge.

[Bawanna]

Did you put an extended mag release on that. Looks like it's sticking out further than usual. May be picture angle.

[TucsonMTB]

Nice work sir! I think you've developed an excellent texture there on the slide
I look forward to seeing the completed project.

I love it when a plan comes together
Regards,
Greg

Thanks, Greg! It is worth noting that your many refinishing projects, including your lovely parkerizing, are part of my inspiration. I hope to do the frame today. I plan to wait for the cool evening and will march right into the shower when I am finished.

That's probably the only thing I don't absolutely love about my Cbob is the course texture which as you mention hangs on leather and makes it rather unsightly. I carry it everyday so it gets drug in and out of the holster a few times a day.

A detective here recently bought the blaster setup from Harbor Freight as well and with some spiritual guidance from Greg he got his new Colt Rail gun that he carries for work to match his Kimber's finish. He's big on having multiple guns set up exactly the same. Same finish, same controls etc.

I inquired if he'd be willing to blast my Cbob and he refused. He did say he'd bring me all the stuff so I could do it myself.

Still building up my nerve. Might like it and then who knows. Might sandblast the house and the van and who knows what.

You done real good. Might just be the incentive I need to push me over the edge.

Go for it! Like Greg, you understand the attention to detail necessary for success.

I can't say that I blame your detective for ducking. Preparation is time consuming and worrisome. Gotta' protect those polished flats, but don't want to miss any blasted surfaces either. I was surprised and tickled that the sights are so easy to remove, especially the pinned front. Then there is the concern about achieving an even texture everywhere . . .

As a matter of fact, it would be hard to trust anyone else, except Greg, to do the work. Yeah, the big dollar shops can certainly be trusted. But, I am poor and would miss my CBOB during the weeks or months that would almost certainly entail.

Did you put an extended mag release on that. Looks like it's sticking out further than usual. May be picture angle.

Yep! Ed Brown part along with his bushing.

Good eyes, sir!

[TucsonMTB]

Complete. This seems like a good time to take a picture or two before we scratch it up again.

[Bawanna]

I like it. Looks like you left it just a bit course on the front there?

[TucsonMTB]

I like it. Looks like you left it just a bit course on the front there?

Good eyes, sir! That was not entirely planned. I believe it will smooth out with a little more glass bead blasting, which will be easy to do. Either that, or I will have to sand it down, sand blast lightly, and then perform one last bead blast. Whatever. It will get dealt with fairly soon.

Now you know why your detective friend declined doing yours.

Still, not too bad for a first time with a total investment, not counting the compressor which has other uses, of $27, including shipping. For the moment, we will just shoot it a bunch and see how it stands up to handling and holsters.

[BEARDOG]

Looks really good Tucson!
Too bad you had to put so much money into tools to refinish it. LOL

[Bawanna]

Looking again I think its more shadow than texture. The one shot it looks the same as the rest of the frame.

I'd like to do the same. Might have to save up the 27 bucks and go for it.

[TucsonMTB]

Looking again I think its more shadow than texture. The one shot it looks the same as the rest of the frame.

I'd like to do the same. Might have to save up the 27 bucks and go for it.

In person, I can see the difference. But, yes, it is subtle and SWMBO didn't notice. She is my QC Queen . . .

Let me know if you want the links to the $5 blaster and $8 worth of glass beads. A little sifting and you could have your own sand. I was splurging at Home Depot.

Looks really good Tucson!
Too bad you had to put so much money into tools to refinish it. LOL

Thank you, sir! Sometimes, it is fun being cheap. Admittedly, I am not really good at it, as a rule.

[Rotorflyr]

Tucson,
That looks horrible, completely ruined in fact...But being the super nice guy I am, I'd be happy to take it off your hands for $25 above the cost of materials that you used when you ruined it AND I'll toss in another $100 PLUS pay for the shipping!

[Bawanna]

I sure hope ole Tucson's keyboard don't melt down in his haste to respond and accept a fine wonderful offer like that.

Not every day you can completely ruin something and have somebody offer you money for doin it.

I'm tempted to accept the offer in his behalf before you withdraw the offer but I'm just not gonna do it. Might be missing something ya know.

[Bawanna]

Wish I could afford a pickup load of the various colors of that wood. Pretty amazing stuff and seems to wear well.

[TucsonMTB]

Wish I could afford a pickup load of the various colors of that wood. Pretty amazing stuff and seems to wear well.

Yeah, in response to a similar post on our local general gun board and the pure 1911 forum (bragging is fun), there were a couple of inquires about the grips. I responded by providing your Emporium link: http://bawanna45.wix.com/bawannas-grip-emporium#

I sure hope ole Tucson's keyboard don't melt down in his haste to respond and accept a fine wonderful offer like that.

Not every day you can completely ruin something and have somebody offer you money for doin it.

I'm tempted to accept the offer in his behalf before you withdraw the offer but I'm just not gonna do it. Might be missing something ya know.

I have a friend who would always respond, "I will take that under advisement" and then he never go back to anybody. Go figure.

Glad you were here to cover home base! I missed that message while over at the Pima Pistol Club range for our usual weekly Garand shooting session.

Seemed like a good chance to put a box of .45 ACP through the CBOB, just to make sure the sights are back in the right place. They are.

Can you say, "One ragged hole where once there was a 2" bullseye sticker"?

Tucson,
That looks horrible, completely ruined in fact...But being the super nice guy I am, I'd be happy to take it off your hands for $25 above the cost of materials that you used when you ruined it AND I'll toss in another $100 PLUS pay for the shipping!

Gosh, I don't know what to say . . . never was any good at selling guns.