CLP for initial cleaning

[greyhoundafw]

Okay I have read and re-read stickey on preping my new CM9 for the range. Also the lube section. I understand not to lube the striker channel. Based on that I am guessing that CLP would not be the first choice for prep correct?

greyhound

[Tinman507]

CLP is good stuff, Just don't get it in the striker.
I use it a lot.

[Rubb]

over 1700 rounds through my PM9...nothing but CLP...never an issue.

[evanrw61]

CLP is what I use religiously, never failed yet.

[TucsonMTB]

However . . . if you have a favorite light grease on hand, a tiny bit on the two horizontal front rails (they look like thin strips of metal set in the polymer but are really part of one embedded steel part and the primary support of the slide in the front) is worth applying. The load bearing rear rail parts are the small stainless tabs at the back end of the plastic rails and a tiny bit of the same grease applied there will help ensure smooth operation, especially during break-in while everything is wearing into smoothness.

Depending on the tolerances in your individual gun, it may not matter. But, it will help, especially if the gun is tight at first. The grease should be one of the "wonder products" . . . usually a light synthetic that will help but not hinder the slide's movements. If you don't already have a favorite, just stick with CLP or whatever you prefer.

We now return you to your regular convenient maintenance channel . . .

[muggsy]

I've used CLP in all of my semi-automatic pistols for years with no problems. Grease is nothing more than oil with a thickening agent. In cold weather grease is not the best choice as a lubricant.

[greyhoundafw]

My concern was cleaning the striker channel. CLP okay in there or will it atract crud?

[jocko]

Idoubtit, I myself like the non cholorinated cleaners that dry instantly but I would bet the clp has just a tad of lub in it that should not mean a damn thing, especial if u spray that channel every time u clean ur gun. Lot of people here use it, so IO go with whqats floats ur boat.. I have never used clp by break free but if it comes in a pressurized spray can, then IMO it should be oK for it is gonna blow out crapola along with cleaning. Just the spray bottles I would shy away from in cleaning the striker channel for no pressure would not IMO do as good as a spray cleaner. Rule of thumb is the less oils in the striker channel the less crude build up should happen

Break-Free's flagship product, CLP is a unique formulation of synthetic oils and individual proprietary ingredients which synergize in combination to do three important tasks simultaneously: Effectively Clean, Lubricate and Protect metal. Break-Free CLP is now recognized around the world as the standard by which maximum metal performance and protection is ensured.

Specifications and features:
Cleans, protects and lubes metal surfaces
Meets mil specs
Removes residue and contaminants
Reduces abrasives such as sand and grit
Prevents corrosion and rust
Won't break down in extreme temperatures
Made of synthetic oils
1 pint spray bottle

[pocket pistol]

I use non chlorinated brake cleaner in my striker channel. I wipe the inside of the slide down with whatever excess is there. Then I coat the whole pistol down with CLP. I love CLP and use it on all of my firearms. I have forever. It is a great product.

[CJB]

I like CLP - use it as all 'round cleaner. I bought a gallon of it not long ago

I don't think the striker will have a problem with a VERY LIGHT coat of CLP

For the barrel locking area - top and bottom, I prefer green synthetic marine grease. It stays put, and takes the high pounding those areas receive. There is no "one good lube" for every part of the pistol, as some parts get a lot of banging around and need a thicker grease lube, and other move fast, and need a thinner oil lube.

[greyhoundafw]

Thanks for the input. I'll get some of the break cleaner and go with the CLP.

[HDoc]

Striker channel + Kroil = happiness...

[seaswol]

Yes!!!!

I've used CLP in all of my semi-automatic pistols for years with no problems. Grease is nothing more than oil with a thickening agent. In cold weather grease is not the best choice as a lubricant.

Try shooting a Remington 1100 that has been properly lubed in sub 32 degree weather Lube it, wipe it down thoroughly then shoot. I did not have CLP back in the day.
Chris