Jocko's Custom PM9

[jocko]

Some photos of my custom PM9 with 25K+ rounds.

Photo#1 Shows left side plus 360 degree stipple work and mag well cut outs plus Magna-Port slide and barrel.
Photo #2 Shows Right side with grip stippling and thumb pads plus trigger contour work done by Cylinder and Slide and Portng work by Magna-Port, kand a better view of my xs big dot sights..
Photo#3 Shows xs24/7 Big Dot Night sights plus heavy slide melt by accurate-iron and titanium/flake finish. Big dot sights photo did not show as goodas I wanted...
Photo #4 Shows slide lock lever reduction and 360 degree countour to lever, done by yours truly with help of my trusty dremel.
Photo#5 Shows right side slide lock pin, after shortening and countouring with dremel to be flush with right side of the grip. Lever still comes out easily.
Some work by cylinder and slide, Most work done by Accurate Iron. Mag well cut out and side lock lever done by owner.I had another photo of the front of the barrel counter bored by Magna-port but it did not come out well..

This is my 24/7 carry peace . I shoot it like I stole it, best defense gun i have ever owned. Most fun gun I have ever owned. I will say I do not shoot it as well as my G19 but it ain't the guns fault either..

thank you for the opportunity to show this gun on this great forum also.

You can click on the photos to enlarge and see far more. Thank you.

bump

[Zippo Guy]

Very nice! How does the grip stippling feel? I like the looks. How long from start to finish with C & S?

[jocko]

love the

Very nice! How does the grip stippling feel? I like the looks. How long from start to finish with C & S?

grip stippling. I would not recommend C & S for the way over charge for so little done. Now Accurate Iron is another story. he is good, he is fast and he is reasonabe. I did not come onto him until after I had some of the work done by C & S.

accurate-iron.com. he can give you a better time of turn around. What you see, he can do it all. He is one super action man also and did an outstanding job on my g19 for me. He is a LEO and a competition shooter and one hell of a smitty.. I have over a grand in all of the work stated, Magna port with barrel recessing was total over $200......

[mx5fan]

Jocko,

Your PM9 looks great, a nice setup indeed!

[polkhigh]

Jocko,
Looks great.

Can I ask how you carry? Holster (pocket/IWB/OWB)?

Do you mind taking a couple of pics of your setup?

[jocko]

front pocket carry in a desantis..

[Wayne's World]

Well done on the photos and well done on the PM9.
If you could, I would like to see more detail of the "Magna-Port".
Barrel and slide, please.

[jocko]

oh my, my son did this photos stuff for me and he is now gone back to engineering school, so can't help you there Wayne's world, but if you go to the magna-port webb site, you can see the same thing, just not on my PM9..

[kpm9]

Love the gun, but not a big fan of the fuchsia couch cover.

[jocko]

actually

Love the gun, but not a big fan of the fuchsia couch cover.

the background is a bathroom towel:9:

[jeepster09]

Jocko

Looks sweet! Is there any issue with NIGHT FLASH with the Magnaport? Would you do the Magnaporting again? In all the posts I have read on porting no one address's the flash question.

[kahrs&cars]

My take on Mag-na-port and muzzle flash

Jocko

Looks sweet! Is there any issue with NIGHT FLASH with the Magnaport? Would you do the Magnaporting again? In all the posts I have read on porting no one address's the flash question.

Hi there Jeepster,

I myself have treated several of my pistols to the Mag-na-port process and am a true believer of their work.

From my experience and IMO (especially with the PM40) there is so much muzzle flash from only having a 3" pipe to begin with that i had not noticed any difference after the port job was performed.

One thing i did seem to notice was that the noise level increased quite a bit. All in all the main benifit of reduced muzzle flip and a quicker follow up shot make the port job worth it's weight in gold. The PM40 is now very user friendly and enjoyable to shoot.

I highly recomend this process to anyone...you'll love it!!

Jocko please chime in and share your experience

[kclawson]

Jocko,

I to would like to see a few close up shots of your PM9 with the Mag-Na-Ports. I am seriously considering having the same port work done on my PM9. Thanks.

Kim

[fitzgood]

Nice PM9 right there! Can you rank the mods in order of bang for the buck?

[kahrs&cars]

Now that's one beautiful and unique PM9 right there Jacko.

I'm also a fan of custom mods and making my firearms owner unique. One thing that really catches my eye and i've thought about having done to my Kahr Pm's is the heavy melt job. Besides aesthetics and being less succeptable to a snag while drawing from a pocket holster can you tell me any other reasons that one would/could expect to benifit from this type of procedure? I'm very impressed with the craftsmanship that Accurate Iron has performed on the slide, the coating they applied looks very nice.

How does the grip stippling feel in the hand?... was that also done by AI or C&S? If you dont mind me asking what was the cost of the heavy melt job and re-finish?

Thanks for all you contributions on this site you're very helpful