Tweet
Sucks up everything I put through it...... !!!! 
That's right..... Today I took her to the range for 267 rounds of my mixed range brass 100gn 380acp and she ate EVERYTHING WITH ZERO PROBLEMS !!!!!
the only issue I had was with the Perfecta brass I had previously tried to feed her, the 15 times it failed to go into battery today I would drop the mag and eject the round to check it, yep perfecta brass everytime..... with my mods it appeared even the perfecta 'almost' went into battery, last time it was hanging way to far back and wouldn't feed hardly at all...
I ran 100 rounds of the 100gn flat tip Extreme bullets I loaded without any hangups, and 167 Berrys RN 100gn zero issues!!!!
I'm positive the problem has been resolved and contribute the extractor as the problem...
Keep in mind my mixed range brass varies from win, fed, starline, pmc, umc, corbon,blazer, lehigh and everything in-between, the only issue I found today was with the shoddy Perfecta brass.. that will only be fed to my lcp from now on.....
KAHR CW380 good to go!!!! I now have a little over 600rds through this gun and the majority are handloads...
I will do a short write up in the tech section for anyone that is interested in DIY fix, this will help those such as myself and others that simply do not want to send in their gun... and will hopefully help alleviate more threads on this subject and google may direct them to the fix here on the site....
Love this little gun its a pleasure to shoot, feels good in the hand, and is as accurate as they come....
if you're unfamiliar with my previous saga you may read what I've done to the gun here..
http://www.kahrtalk.com/showthread.p...se-in-the-know
That's right..... Today I took her to the range for 267 rounds of my mixed range brass 100gn 380acp and she ate EVERYTHING WITH ZERO PROBLEMS !!!!!
the only issue I had was with the Perfecta brass I had previously tried to feed her, the 15 times it failed to go into battery today I would drop the mag and eject the round to check it, yep perfecta brass everytime..... with my mods it appeared even the perfecta 'almost' went into battery, last time it was hanging way to far back and wouldn't feed hardly at all...
I ran 100 rounds of the 100gn flat tip Extreme bullets I loaded without any hangups, and 167 Berrys RN 100gn zero issues!!!!
I'm positive the problem has been resolved and contribute the extractor as the problem...
Keep in mind my mixed range brass varies from win, fed, starline, pmc, umc, corbon,blazer, lehigh and everything in-between, the only issue I found today was with the shoddy Perfecta brass.. that will only be fed to my lcp from now on.....
KAHR CW380 good to go!!!! I now have a little over 600rds through this gun and the majority are handloads...
I will do a short write up in the tech section for anyone that is interested in DIY fix, this will help those such as myself and others that simply do not want to send in their gun... and will hopefully help alleviate more threads on this subject and google may direct them to the fix here on the site....
Love this little gun its a pleasure to shoot, feels good in the hand, and is as accurate as they come....
if you're unfamiliar with my previous saga you may read what I've done to the gun here..
http://www.kahrtalk.com/showthread.p...se-in-the-know
Comment