Another CM9 Broken Follower?

[jocko]

If it has to go back u insist on a prepaid label. I would suggest dealing with Jay at kahr over eion...

I would also suggest taking the advice of getsome to,

[jocko]

take

I ran another 50 rounds through the CM yesterday (damn it shoots and functions fine) I had one issue with the new 7 round mag .

Looks like the follower didn't push the round all the way up after a round was fired, the gun was completely locked up, the mag would not drop and I couldn't move the slide.

I ended up slapping the bottom of the mag and the round popped up and the slide flew closed and chambered that round.

I ran out of solvent, this mag feels like it has some sort of residue on it, it does not drop free of the gun like the 6 rounder does .

The follower in the 7 round mag has not developed a crack and the cracked follower in the 6 rounder has not broken yet.

Kahr replied that after I get the new follower, if it does break as well we would go from there, Eoin did not say if they would send me a label.

I'm hoping it won't break anymore followers and will probably take getsome's advice and mod the followers .


Sent from my iPhone using Tapatalk

that 7 round magazine apart to see that the spring is in OK, and while it is apart, polish with some fine paper under the feed lips of the magazine tube. U never know how little things can add up to be helpful.

[Decado]

Thanks Jocko

[railroader]

Just for an update on my CM9. It broke 2 followers so Kahr had me send the gun in on their dime. Since I got it back I took out shooting a few times with no problems. Really like the gun. Mark