Kahr newbie from KC...

[BigD]

Hey guys just thought I would post up a hello!

I have been lurking for the past few weeks, pending the arrival of my barely used PM9 (DLC with night sights). I got it tonight and decided to join up. I tend to lurk more then post but figured I should say hello!

I picked it up tonight from my dealer, very impressed with it to say the least! I got it to round out my CCW options. Once broken in and proven I will add it into the stable of a Kel-Tec P3AT, Glock 27, and a Dan Wesson 1911 CBOB. The PM9 fits in perfectly!

I didn't get the box or spent shell casing, and according to the serial number list my range is in 2006. (VC47xx) Judging from the condition of it I would say it couldn't have had more then a single box of rounds put through it! Must have been a safe queen!

I broke it down and detail stripped it. Cleaned and lubed it per the chart, then hand racked it about 150 times (my fingers hurt ha!). I can't wait to go shoot it, but time is very limited at the moment, hopefully soon.

I went ahead and ordered an IWB for it while I was waiting. For this one I wanted it to just be small and simple and not have to wait a year! I currently have and love a High Noon Holsters Tailgunner for the glock and decided to try out one of their cheaper "stocking item" holsters, so I ordered up a Mister Softy for it. I have to say it fits the bill I was looking for to a T! Simply disappears in the waist band! I will probably pick up a pocket holster of some type also. I like options!

All in all this little pistol seems to be a fantastic package! I need to pickup at least one more 6 round mag. I have to say I don't care for the 7 rounder at all, but that's just my opinion. Also need to figure out a rubber grip wrap for it as well..

Whew sorry, that got longer then I expected! In short, hello!

[DustyJacket]

Welcome.

The PM9 looks like a nice package.

When I was buying, you could not find one in KC, so I ended up with a 2009 PM40 instead.

Glad you found one.

[Dietrich]

Hello and welcome to Kahrtalk,where the men are men and the sheep are nervous.

[Raoul]

Welcome BigD. You'll like that PM. Have a Gates BQ for me sometime.

[RevDerb]

Welcome, BigD. I'm sure that you'll love the PM9. I did mine and still can't figure out why I sold it. Please don't just lurk. We need members to communicate with.

[zena]

Welcome BigD and I second RevDerb's sentiment....Don't lurk. Talk to us. The mix is what makes it fun. You're going to find a lot of happy Kahr owners, good info and new friends. (I use lots of smilies!)

[hoot]

Hey guys just thought I would post up a hello!

I have been lurking for the past few weeks, pending the arrival of my barely used PM9 (DLC with night sights). I got it tonight and decided to join up. I tend to lurk more then post but figured I should say hello!

I picked it up tonight from my dealer, very impressed with it to say the least! I got it to round out my CCW options. Once broken in and proven I will add it into the stable of a Kel-Tec P3AT, Glock 27, and a Dan Wesson 1911 CBOB. The PM9 fits in perfectly!

I didn't get the box or spent shell casing, and according to the serial number list my range is in 2006. (VC47xx) Judging from the condition of it I would say it couldn't have had more then a single box of rounds put through it! Must have been a safe queen!

I broke it down and detail stripped it. Cleaned and lubed it per the chart, then hand racked it about 150 times (my fingers hurt ha!). I can't wait to go shoot it, but time is very limited at the moment, hopefully soon.

I went ahead and ordered an IWB for it while I was waiting. For this one I wanted it to just be small and simple and not have to wait a year! I currently have and love a High Noon Holsters Tailgunner for the glock and decided to try out one of their cheaper "stocking item" holsters, so I ordered up a Mister Softy for it. I have to say it fits the bill I was looking for to a T! Simply disappears in the waist band! I will probably pick up a pocket holster of some type also. I like options!

All in all this little pistol seems to be a fantastic package! I need to pickup at least one more 6 round mag. I have to say I don't care for the 7 rounder at all, but that's just my opinion. Also need to figure out a rubber grip wrap for it as well..

Whew sorry, that got longer then I expected! In short, hello!

Hello to you Big D,
I put on the Pierce grip extensions and I really like them. I don't like the 7 round mags either. I got an Alessi IWB holster and it is sweet. stay away from Winchester White box (per a technician at Kahr) but it will fire any good American Brass. I have +1000 rounds at 100% performance. I trust my little buddy. I don't have rubber grips and I don't feel it needs them. I have a Desantis Nemesis and a Galco pocket holster . Both work fine. I haven't tried the Super Fly yet. I hear it sticks to the inside of the pocket better. Have fun...

[BigD]

Well thanks for the welcomes!!

This one made its way to me from Las Vegas Dusty, to be honest I didn't even look for one locally, this one found me so to speak!

Raoul, how about some Arthur Bryant's, or Oklahoma Joe's instead?? The BBQ at gates is ok, but the service is horrible! Just my opinion but I can't stand being yelled at the minute I walk up! "WHHAATCHOO WANT?!?!" lol just doesn't do it for me!

I'm sure I will mingle some fellas, but usually I don't have much to add! I just read and learn but I am sure some questions etc will come up!

And I can't wait to go shoot this pistol! I might have to just squeeze some time in to make it happen! Hopefully it will run ok for me. I just hope it didn't make it into someones safe to sit due to problems with it. But like I said it's literally in MINT condition! There is no way it's previous owner made it through proper break in according to the manual..

The feed ramp looks like it might need a bit of a polish so I may do that before I make it to the range just to help things along. I didn't have access to the materials when I did the detail strip or I would have went ahead and done it then. But hey just another excuse to spend some more time with it right!

[wagon]

Welcome to the forum, BigD from KC, sounded like you're all set to go packing except for the remaining optional goodies.

I did get myself a Pearce grip and I do like it for OWB/IWB, but if I'm to pocket carry -- which I have no plan to -- I'd get an extra 6 rounder (like you're going to) without a Pearce Grip. I like options, too

Have fun during the break-in, You will enjoy the smoooooth trigger no doubt.

Stay safe!

[johnatw]

What did the Tech have against Winchester White Box? Just curious.

[Bigcube]

Welcome, lot's of good info here. Happy PM9 owner here

What did the Tech have against Winchester White Box? Just curious.

x2, I've ran lot's of that though mine with no problems.

[hoot]

Here Is the email:

Good afternoon,

You may use any good American Brass in your pistol. You may want to stay away from Winchester White Box though as that brand has shown to give our pistols problems. Other than that, like I said, any good American Brass. Your pistol is rated for +P ammo. You can use this sparingly for practice shooting to get used to the kick of it but you shouldn't use too much. You should save that ammo for personal protection.

Please feel free to contact me should you have any further questions.

Thank you,

Glen Malo
Kahr Customer Service
130 Goddard Memorial Dr.
Worcester, MA 01603
----- Original Message -----
From: geogibjr@aol.com
To: service@kahr.com
Sent: Wednesday, June 03, 2009 12:08 PM
Subject: Kahr PM9


Hello,
I recently purchased a PM9 and I was wondering if Kahr has a recommendation on the type of 9mm ammunition to use.
There are so many different manufacturers, grain weights, brass vs aluminum case, etc. I saw a Kahr PM9 review on Youtube and they recommend CCI Blazer 115 gr aluminum case JHP.
I have not fired my PM 9 yet and I want to make sure I am using factory recommended ammunition.

Thank you

[ltxi]

What did the Tech have against Winchester White Box? Just curious.

I'm one of the folk Glen got feedback from. Kahrs are not particularly fond of WWB...apparently due to hard/inconsistently hard primers. Skipping the detailed essay....there is nothing wrong with WWB ammo, nor with Kahrs; exactly. The gun design (optimization of miniaturization coupled with production tolerances) does appear to be the primary cause of the marginal incompatibility.

[dirksterg30]

Welcome to the forum, BigD.

I'm one of the folk Glen got feedback from. Kahrs are not particularly fond of WWB...apparently due to hard/inconsistently hard primers. Skipping the detailed essay....there is nothing wrong with WWB ammo, nor with Kahrs; exactly. The gun design (optimization of miniaturization coupled with production tolerances) does appear to be the primary cause of the marginal incompatibility.

When 9mm ammo was plentiful in the good olde days, I shot WWB more than anything else. Never had any problems in over 2,000 rounds through my Kahr MK9.

[ltxi]

Should have noted that my comments apply only to current production WWB. Long time user of it and never had an issue before this past year. Also have never had a ftf with any firearm other than Kahrs.....but can trace the inconsistency in primer strike indentation to/through other guns.