Looking at these holsters for my CM9 - Opinions?

[Cristofori]

I just bought my first Kahr (CM9), and was looking at holster options for CCW. I'm considering these three holsters, two for pocket and one for IWB, all by DeSantis. I'm familiar with their Nemesis line of pocket holsters but not the other two. They only list these as for the PM9, but I'm assuming that anything that will fit that gun will fit the CM9 as well.

1. "Pocket-Tuk" (Can be used for both pocket or IWB).
2. "Nemesis" (Pocket)
3 "Cozy Partner" (IWB).

Anyone have any experience with these holsters? Any other recommendations from different manufacturers? I don't have my heart set on any particular make or model which is why I'm asking.

[JFootin]

1. "Pocket-Tuk" is no good for anything.
2. "Nemesis" is a good pocket pistol.
3. "Cozy Partner" I have no experience with, but seems like a good IWB.

The best holster I have found for forget it is there comfort 24/7 with my CM9 is the PJ IWB Holster.

[JFootin]

The Big Grin Club!

Welcome to the forum, Cristofori! There is a wealth of valuable information in the New Member Area and the Kahr-Tech sections of the forum.

And welcome to the CM9 Owners Club! Our official symbol is the wide grin smily because we are so happy with our purchase that we can't wipe the smiles off our faces!

Here is your club badge.

[Cristofori]

Welcome to the forum, Cristofori! There is a wealth of valuable information in the New Member Area and the Kahr-Tech sections of the forum.

And welcome to the CM9 Owners Club! Our official symbol is the wide grin smily because we are so happy with our purchase that we can't wipe the smiles off our faces!

Here is your club badge.

Thanks! BTW... I did properly introduce myself in the New Member Area, and did get some great info, but nothing on holsters for a CM9. I need to find something fast as I'm going to be getting my CCW permit anytime now.

[Short Bus]

Thanks! BTW... I did properly introduce myself in the New Member Area, and did get some great info, but nothing on holsters for a CM9. I need to find something fast as I'm going to be getting my CCW permit anytime now.

If you need it fast, I would get a Foxx Trapp, I think the wait is a month or more for a PJ and Ray will have a Trapp to you in a couple days.

http://foxxholsters.onlybusiness.com...r-details.aspx

[OnTarget31]

Hey short bus how is that foxx trapp? Really looking at that one but haven't found any feedback on it with the cm9.

[OldLincoln]

I really like my Garrett Silent Thunder for the PM9.

[Riccardo]

You really need to consider the Remora holster. When comparing to your choices, I would have to say it's the best. Simply an amazing product for IWB...clipless but it DOES NOT move an inch. And the material is so grippy, it's great for pocket carry...that is if you can get it into the pocket. It sticks that much.





http://remoraholsters.com/

[Short Bus]

Hey short bus how is that foxx trapp? Really looking at that one but haven't found any feedback on it with the cm9.

I have a P9 and it's easy to carry a gun the size of a P/CW9 in a Trapp, a PM/CM9 would disappear.

[68blackbird]

I have a P9 and it's easy to carry a gun the size of a P/CW9 in a Trapp, a PM/CM9 would disappear.

Been wearing the Trapp for couple weeks with CW9, actauly played golf last weekend took it off on 1st tee box as not to "print" but could have played with it on.

[OnTarget31]

Thanks guys!

[Hunter991]

PJ holsters are nice but you will wait probably 6+ weeks to get one. Harwell and Foxx make a nice holster you should check out. i have both and use them all the time.

[aKahrt_and_p2KT]

Hey short bus how is that foxx trapp? Really looking at that one but haven't found any feedback on it with the cm9.

If you are considering that take a look at this
https://www.harwellholsters.com/prod...appendix-carry

Very nice holster and you can adjust the cant anywhere that you want it. I found that the clip was a little longer than I wanted so I put a longer clip on there but otherwise it's a great sturdy product. I have a number of double clip holsters but I think the design of this one is going to put all the others on the back burner as something the size of the cm9/pm9 can really be supported by one clip over the gun. Just a suggestion, sorry I haven't gotten any actual pics of it up but I highly recommend it. Also, the picture in the link makes it look like the kydex is sloppy but it's not, it fits great.

The PJ holster is great if you know what cant you want your holster to be at.

[Short Bus]

If you are considering that take a look at this
https://www.harwellholsters.com/prod...appendix-carry

Very nice holster and you can adjust the cant anywhere that you want it. I found that the clip was a little longer than I wanted so I put a longer clip on there but otherwise it's a great sturdy product. I have a number of double clip holsters but I think the design of this one is going to put all the others on the back burner as something the size of the cm9/pm9 can really be supported by one clip over the gun. Just a suggestion, sorry I haven't gotten any actual pics of it up but I highly recommend it. Also, the picture in the link makes it look like the kydex is sloppy but it's not, it fits great.

The PJ holster is great if you know what cant you want your holster to be at.

That look kinda like the Little Foxx, but with 1 screw holding the clip. The 1 screw for the clip would be a deal breaker to me, I find that 1 screw is usually not enough to keep something from moving in undesirable ways. YMMV

http://foxxholsters.onlybusiness.com...s-details.aspx

[aKahrt_and_p2KT]

That look kinda like the Little Foxx, but with 1 screw holding the clip. The 1 screw for the clip would be a deal breaker to me, I find that 1 screw is usually not enough to keep something from moving in undesirable ways. YMMV

http://foxxholsters.onlybusiness.com...s-details.aspx

I wouldn't disagree with you about two screws versus one. I tried emailing Foxx Holsters a couple of questions and never heard back from them, meanwhile the harwell holster came to my attention and I went with it based on it having good reviews. So far if the screw is tight it's not moving. I really went with it BECAUSE it was one screw because I figured then I would have the most options for raising or lowering the holster as I need by drilling holes in pre existing clips I have left over or borrowed from other holsters. Either way, it seems like a good design for a sidearm the size of the kahr.