PM45....ported?

[PaiN]

Did Kahr ever sell a ported PM45?
I was calling around today looking for a CM9, got to talking with the sales guy. He said the shop just took in a super clean PM45 with "factory porting" He said this PM is in pristine condition but only comes with one mag, he'd let it go for $500....

hmmmmm

[Bawanna]

I sure don't recall ever hearing of one. I wonder if it went to magna port? They sure look factory when they come back.

I'm pondering sending my PM45 off for the Magna Port treatment. It really don't need it but it looks real cool and it certainly can't hurt anything. Might tone down the flip a little.

At 500, I believe I'd scoop it up, especially if it is Magna Ported. I wonder if its one of those longer barrel types where it's ported in front of the slide?

Worth going to look at anyhow.

[CJB]

The only auto I ever ported...

I took a .45 Commander, and ported it. I EDM'd trapezoids in the barrel, behind the bushing, and I EDM'd ovals in the slide to correspond with the trapezoids. I had to enlarge the ovals twice in order for it to function (that is, let enough gas out). Then the problem was the bushing would get debris on it, and I'd have failure to go into battery. So... I reduced the diameter of the barrel about .005 overall, and that left a more pronounced fitted area for the bushing. Then I ground splines in the barrel's bushing area. Those were about .025 wide by about .010 deep. The splines did the trick, and the dirt and crap just pushed out the spline grooves, past the bushing.

If someone said port this PM, I'd put in a longer barrel and port the part that sticks out. I think someone here had one like that.

[CJB]

Bawanna, I'd leave it alone. The PM's have a rather large open ejection port, where the clearance cut is. You're gonna get gas and debris come out of there like poo fountain with every shot. I cant see any port on the forward part of the slide overcoming poo coming out that side opening.

I've ported lots of revolvers and single shots for me, and for customers, but... when you port the auto's... there is a lot more involved.

[jocko]

he

Did Kahr ever sell a ported PM45?
I was calling around today looking for a CM9, got to talking with the sales guy. He said the shop just took in a super clean PM45 with "factory porting" He said this PM is in pristine condition but only comes with one mag, he'd let it go for $500....

hmmmmm

if u don't mind is full of crapola!!!

but the price is good.

[jocko]

I have my Pm9 ported, My G19 ported my K9 ported all by magna port. NO poo fountain crapola that ur talking about. Shot magna ported guns for over 30 years, I centainly think mag na port knows how to port semi's. Probably in my 30+ years of owning guns, have had at least a dozen or more by magna port..I don't want to dispute what your work has shown but I certainly have a very good idea how magna ports system works and no POO on any of my guns. I think Bawanna has a magna ported K9. No bushings in the PM45 by kahr

[PaiN]

Sooooo.....If the PM45 in question has ports then they are likely aftermarket.

This shop is not exactly close, I don't know if its worth the ride(with gas >$4.00/gal) to maybe find some possible basement drill press special....and where the hell is its second mag??

[Bawanna]

Sooooo.....If the PM45 in question has ports then they are likely aftermarket.

This shop is not exactly close, I don't know if its worth the ride(with gas >$4.00/gal) to maybe find some possible basement drill press special....and where the hell is its second mag??

Maybe they would send you a picture. Should be able to tell if it the drill press special or Magna Port.
I have a K40 magna ported, it worked well.

[CJB]

I have my Pm9 ported...NO poo fountain crapola that ur talking about.

I'm glad! The clearance cut does present a problem for egress. Did they port the slide and barrel? I'd LOVE to see a picture.

Try not to confuse the two scenario's I mentioned Jocko. The 1911 worked great, but during its perfection, I did encounter the space between the barr el and slide becoming pressurized, and the slide wouldn't hardly cycle at all! The extra venting fixed that. I know there is a LOT of gas that is created when you have to run the ports back a little more, since the 1911's have the bushing right were you'd like the ports to end up. The splined bushing thing, come to recall it more... was probably due to the lubed lead bullets, that I had an unlimited supply of at the time (we took range lead and recast it into our own bullets for our own range reloads).

On the Kahr's, that cut on the slide at the port... is largely covered once the slide cycles a little, and brass does fly out there anyway... but the gas would make me very cautious. If its not a problem, then I'm being overly careful (and relying on my own experience).

Jocko.... I'd love to see a pic or two of that ported PM9... (drool drool)

[Bawanna]

http://kahrtalk.com/attachment.php?a...2&d=1274058538

Heres one shot of my K40. I think theres a couple more. There was a thread with some action shots with pretty cool light shows.

[CJB]

Very slick. Those ports are about as big as the ovals I ended up with on that commander I mentioned. Now yas got me thinking I need to scoot over to the old shop and see if they've still got my old electrodes tucked away. I really dont feel like grinding up new ones... just for one gun. It takes anyplace from three to five to do the job on the EDM setup they've got.

[PaiN]

I had to make an unexpected run up to MA this eve(my mom was hospitalized{all is well now}) on the way back I stopped to look at this PM45 since the shop is up that way. The PM45 in question is very clean and very obviously Magna ported...I did not buy it, but at $500 I have to give it serious consideration.

[OldLincoln]

Kahr sells ported barrels in their Kahr Shop.

[MikeyKahr]

Sorry for news

I had to make an unexpected run up to MA this eve(my mom was hospitalized{all is well now}) on the way back I stopped to look at this PM45 since the shop is up that way. The PM45 in question is very clean and very obviously Magna ported...I did not buy it, but at $500 I have to give it serious consideration.

Sorry to hear that your mom was hospitalized, PaiN, but glad to hear that all is well now. And I'm glad you got to see the PM45 in person. That is a fantastic price, especially since Magnaported. I'm assuming stock sights and bitone otherwise it would be in your arsenal already? If near me I'd have to give it serious consideration too.

[PaiN]

Sorry to hear that your mom was hospitalized, PaiN, but glad to hear that all is well now. And I'm glad you got to see the PM45 in person. That is a fantastic price, especially since Magnaported. I'm assuming stock sights and bitone otherwise it would be in your arsenal already? If near me I'd have to give it serious consideration too.

Thanks, mom is alright.
It was very tempting....There is always a but(in this case three) Magna porting is a bonus, I guess, but nothing I'd look for in a gun. I also worry with a ported gun that if I had to shoot(r to l) out the car window...I might get a face full of blast Other than the ports its basic and only includes one mag, by the time I get night sights and at least 1 extra mag were talking well over $600. Chovyman has a PM45 for sale right here for $625 w/ night sights, 3 mags and known good function....(I'd be on it, but I haven't been able to save 62,500 pennies yet ) The third reason for not jumping is I have a line on a NIB CM9....